Bioreactors Perfusion Vascular Custom

Technical specifications

These are the main technical specifications of EBERS' products. Please contact us for further information about of our products.

Master Unit

Automatic CO2 incubator with integrated peristaltic pump system
General features Double door construction with stainless steel internal chamber
Integrated double peristaltic pumping system
Internal dimensions [W x D x H] 54 x 45 x 69 cm
Temperature range +5 to 60 degrees Centigrade
CO2 tension range 0 to 20%
O2 tension range 0 to 21%
Peristaltic pumping system
General features
  • Fully integrated in the C02 incubator
  • Pumpheads available in the rear wall of the incubator internal chamber
  • Electric engines, electronics and power supply outside the incubator
  • Up to 20 channels depending on the configuration
Number of pumps 2 independent pumps
Number of pumpheads
  • Up to 2 pumpheads per pump
  • Two models of pumpheads
    • HF, for high flow rates
    • LF, for low flow rates
Flow rate
  • HF pumphead: 0.09 to 400 mL/min
  • LF pumphead: 0.003 to 33 mL/min
Number of channels per pumphead
  • HF pumphead: 1 channel/pumphead
  • LF pumphead: 5 channel/pumphead
Flow profiles
  • Constant, ramp and alternating preconfigured flow profiles
  • Custom profiles can be easily programmed
Control system Digital control system easily operated from a touchscreen
Dimensions [W x D x H]
70 x 90 x 85 cm
Weight
125 kg

Perfusion culture package

Perfusion package
General features Designed to perfuse media through cell seeded scaffolds of different sizes shapes and materials
Design
  • Two piece chamber + holding disks
  • Samples are accommodated in cavities of the holding disks that tailored to specifics needs
  • Several samples can be accomodated in the same chamber
Scaffolds/samples
  • A wide variety of scaffolds/samples can be used in the chamber
  • Up to 40 mm diameter, depending on the material
Sterilization All the chamber components are made of bioinert materials and can be autoclaved at 121 degrees Centigrade, 1.1 bar

Vascular culture package

Vascular culture package
General features Designed to apply a pulsatile medium flow through the lumen of vessels
Design
  • Easily adaptable to different vessel lengths and diameters
  • Separate flow circuits inside and outside the vessels lumen
Scaffolds/samples
  • A wide variety of scaffolds/samples can be accomodated in the chamber
  • Up to 60 mm length, depending on the material
Sterilization All the chamber components are made of bioinert materials and can be autoclaved at 121 degrees Centigrade, 1.1 bar